Device function settings#
Indicator Function#
Set which function the indicator represents.
* Decode Indication#
No Success Beep on Decode#
Decode Success Indicator#
Power Indication
The decode indicator stays on for a specified time after a successful decode, provided that the indicator is used for decode indication.
Disable#
Power Indication#
Decode Indicator Control#
The decode indicator supports the following operating modes.
Mode |
Indicator Logic |
|---|---|
Mode 0 |
Off at power-on, on after a successful decode, and off again after the specified time. |
Mode 1 |
On at power-on, off after a successful decode, and on again after the specified time; it also stays on in sleep mode. |
Mode 2 |
On at power-on, off when decoding is triggered, on when decoding succeeds, and off again after the specified time. |
Mode 3 |
The decode indicator is used as an illumination lamp. It turns on during decoding and turns off when decoding ends. |
* Mode 0#
Mode 1#
Mode 2#
Mode 3#
Illumination Control#
* On During Decode#
Always On#
Always Off#
Aiming LED#
Supported on 2D products
Aiming LED Control#
* On During Decode#
Always On#
Always Off#
Whether the aiming LED blinks#
* Blink#
Do Not Blink#
URL blocking#
* Disable#
Enable#
Invoice function#
Turn on the invoice function and automatically turn off Code 128. If you need to read Code 128, you can turn on Code 128 again.
Automatic identification and output of VAT invoices#
* Disable#
Enable#
Invoice type#
* Special invoice#
Ordinary invoice#